Scanvogn miljøvogn


Staff cabin with decontamination

Facilities and design

The environment cabin is a staff cabin built to meet special hygiene guidelines when working with potentially harmful substances. The cabin comes in sizes for 3 to 4 people. The cabin has a stylish design, giving the user a feeling of space and comfort.  The cabin uses LED strips for a comfortable white and energy-efficient light.

Two separate zones

The environment cabin consists of two separate zones. Zone 1 is for storing dirty work clothes and contains cupboards, a hand basin and shower cabinet. Zone 2 resembles a standard staff cabin with cupboards and normal clothes storage, a living area and toilet. The two zones are connected so you can easily move from one zone to the other after decontamination.

Special safety requirements

If you work with toxic or bacteria-filled substances on building sites or similar, you must make an environment cabin available for staff. These are often used for work involving oil, epoxy and asbestos. The cabin can be constructed as a pioneer cabin, so that it can function without being connected to external power, water and drainage.

Easy to use and clean

The cabin connects to a standard tow bar and can be set up and ready in minutes. This allows you to move the cabin from one place to another, quickly and efficiently and without any hassle. The cabin is made from cleaning-friendly and durable materials, saving you time on cleaning and maintenance.

Technical info

Model 570

Scanvogn miljøvogn 520
  • Dimensions and weight

    External: 5700 x 2280 x 2900 mm

    Internal: 5596 x 2176 x 2100 mm

    Own weight: 1550 kg

    Total weight: 1800 kg

    Capacity: 3 people

  • Facilities

    Toilet, waste disposal, shower cabinet, 2 hand basins

    Refrigerator, coffee machine, notice board

    Fixed table 1100 x 690 mm, 4 chairs

    2 fixed benches, 6 steel cupboards

    Windows: 1 1245 x 825 mm, 2 510 x 410 mm

    2 towel holders, 8 coat hooks

    Elephant grate, free standing steps

    3 radiators

  • Plumbing & electrics

    400 V - 16 A CEE inlet

    30 L water heater

    LED light strip

    Electrical circuit panel


Optimum density

Optimum density

We cut all the outer trailer wall panels with a seam and fit them so that the angle seals closely around the floor. We also cut the corners with a seam and assemble them with sturdy anodized aluminium profiles. This results in a cabin with maximum trailer body strength and density and ensures you get the highest quality.

Solid-cast curved roof

Solid-cast curved roof

All our mobile trailer units come with a solid, single piece-cast roof. This ensures your portable  unit is weatherproof in all conditions, this also significantly increases its lifetime. The roof is cast with an even bend for optimal strength and water drainage. The roof also has a gutter system, which helps direct water and dirt away from doors and windows.

Optimum protection

Optimum protection

We only maintain the highest standards for corrosion protection. All our portable trailer cabins come with a sturdy heat galvanised chassis. Galvanisation is only done once the chassis has been mechanically processed, so that all the edges and bolt holes have also been galvanised and sealed.



Scanvogn miljøvogn indgang
Scanvogn miljøvogn ren zone
Scanvogn miljøvogn omklædning
Scanvogn miljøvogn opholddsrum
Scanvogn miljøvogn toilet
Scanvogn miljøvogn indgang
Scanvogn miljøvogn bad
Scanvogn miljøvogn ren zone