Mobile fridge for storage and transport


The cooler cabin is made of 60 mm XPS sandwich elements for extra high insulation and comes with a refrigeration system that can cool down to minus 20 degrees. The doors use stainless steel bar locks and hinges, which are welded on a stainless steel frame that covers the entire door opening. The cabin has a load capacity of 1850 kg and a capacity of 6 EUR pallets.

Design and capacity

The floor and walls are coated with aluminium plates so that you can place heavy objects and use a pallet lift without risk of harming the inside of the cabin. Anchor tracks are fitted to the walls to stabilise the content during transport. Tracks can also be installed for a cooler curtain, to further minimise cold temperature loss.

Suitable for several industries

The cooler cabin is used in several industries, such as the fishing, food and events industry for storing and transporting fresh food and drink. It has an extra sturdy chassis with suspension, which makes it suitable for fast transport even with a load capacity of nearly 2 tonnes.

Easy to use and clean

The cabin connects to a standard tow bar and can be set up and ready in minutes. This allows you to move the cabin from one place to another, quickly and efficiently and without any hassle. The cabin is made from cleaning-friendly and durable materials, saving you time on cleaning and maintenance.

Technical info

Model 390

  • Dimensions and weight

    External: 3920 x 1850 x 2600 mm

    Internal: 3796 x 1726 x 2000 mm

    Own weight: 950 kg

    Payload: 1850 kg

    Capacity: 6 EUR paller

  • Facilities

    Refrigeration system - Cibin Alaske 240 OBN

    60 mm XPS insulation

    6 anchor tracks

    1 side bar (placed on ancher tracks)

    Aluminium plate on floor

    117 mm aluminium plate up along the wall

    Rubber packaging along doors

    Stainless steel locks and hinges

    Heat in door frame (optional)

  • Plumbing & electrics

    230 V / 16 A CEE inlet

    LED light strip

    Electrical circuit panel


Optimum density

Optimum density

We cut all the outer trailer wall panels with a seam and fit them so that the angle seals closely around the floor. We also cut the corners with a seam and assemble them with sturdy anodized aluminium profiles. This results in a cabin with maximum trailer body strength and density and ensures you get the highest quality.

Solid-cast curved roof

Solid-cast curved roof

All our mobile trailer units come with a solid, single piece-cast roof. This ensures your portable  unit is weatherproof in all conditions, this also significantly increases its lifetime. The roof is cast with an even bend for optimal strength and water drainage. The roof also has a gutter system, which helps direct water and dirt away from doors and windows.

Optimum protection

Optimum protection

We only maintain the highest standards for corrosion protection. All our portable trailer cabins come with a sturdy heat galvanised chassis. Galvanisation is only done once the chassis has been mechanically processed, so that all the edges and bolt holes have also been galvanised and sealed.



Scanvogn kølevogn 01
Scanvogn kølevogn 03
Scanvogn kølevogn 04
Scanvogn kølevogn 02
Scanvogn kølevogn 06
Scanvogn kølevogn 07
Scanvogn kølevogn 05
Scanvogn kølevogn 08